Window Cleaner Vacuum Robot W15S

The W15S Smart Glass Cleaning Robot effectively cleans windows, mirrors, and facades, leaving them sparkling clean effortlessly.
It features a powerful suction system that securely grips glass, along with microfiber pads that remove dust and grime.
It's equipped with a water/detergent spray tank and multiple cleaning modes for even surface coverage.
Ideal for apartments and high-rise buildings, it minimizes risk and significantly reduces cleaning time. 
 
Technical specification:

Dimensions: 290x144x120 mm

Power: 90 W

Input: 100–240 V ~ 50/60 Hz, 1.6 A

Noise level: 65 dB

Motor: Brush

operating : electric cord

Number of cleaning modes: 3

Operating temperature: 0–40 ℃

Storage temperature: -10–50 ℃

Cleaning speed: 1 m² / 4 min.

Suction power: 5600 Pa

Safety rope length: 4 m

Water tank capacity: 40 ml

Maximum cleaning area: 6x4 m

Minimum cleaning area: 0.35x0.35 m

Water spray: Single nozzle

How to use:

1. Preparation and Safety Precautions (Very Important Step)

Safety Rope: Before anything else, make sure to secure the safety rope included with the device to a stable object in the room (such as a railing or a heavy piece of furniture). This prevents the robot from falling and crashing in case of a power outage.

Power Connection: This type of robot typically operates directly from the power supply to maintain suction power, but it also has an internal emergency battery (UPS) that prevents it from falling immediately if the power goes out. Make sure the emergency battery is fully charged before first use.

2. Preparing the Robot for Cleaning

Attaching the Pads: Ensure that the round cleaning pads (microfiber) are correctly and flat on the two rotating wheels on the bottom of the device.

Filling the Liquid: As shown in the picture, the device has a small reservoir. Open the lid and fill it with glass cleaner or clean water. (The robot is equipped with a small spray nozzle that it will use while moving.)

3. Installation and Operation

Attaching the robot to the glass: Place the robot on the glass (preferably about 10 cm away from the window frame).

On: Press the main power button (the black button clearly visible in the image). You will hear the powerful suction motor, and the device will attach itself to the glass. Ensure it is secure before releasing the handle.

Starting to clean: Use the remote control typically included with these devices, or press the power button again to begin the automatic cleaning cycle. The device will move up and down in a zigzag motion, wiping the glass while automatically spraying the cleaning solution.

4. Removal and Cleaning After Finish

Taking the device: When the robot has finished cleaning, it will usually return to its starting position and emit a beep.

Turning off suction: Hold the device firmly by the handle, then press and hold the power button to turn off the suction motor, and gently pull it off the glass.

Washing the towels: Remove the microfiber towels and wash them thoroughly (they can be machine washed) and leave them to dry in preparation for the next use.