High Speed Portable Air Turbo MDJ01

1. Basic OperationCharging: Connect the provided USB Type-C cable to the port at the bottom of the handle. A full charge typically takes 3–4 hours.Power On/Off: Press and hold the power button for 3 seconds to turn it on.Adjusting Speed: Once on, short presses of the power button cycle through three speed settings: Low (Green), Medium (Yellow), and Max (Red).2. Using Different ModesThe device has two main air ports: the front (intake) for suction and the rear (exhaust) for blowing air.Vacuum Mode (Front Port):Attach the suction cup or a nozzle (like the flat or brush tip) to the front intake.Ensure the HEPA filter is securely installed inside the dust canister before use to protect the motor.Blower Mode (Rear Port):Attach the pointed blower nozzle to the rear exhaust port.This mode is ideal for dusting keyboards, electronics, or drying surfaces.Inflator Mode (Rear Port):Attach the inflation nozzle to the rear exhaust port.Use this for inflating air mattresses, pool floats, or balloons.3. MaintenanceEmptying Dust: Twist and pull the front dust canister to detach it, then remove the filter to dump the debris.Cleaning the Filter: You can wash the HEPA filter with water, but it must be 100% dry before you reinstall it to avoid damaging the motor