Dsp Carpet And Sofa Cleaning Machine KD2049
The DSP KD2049 is a specialized device for effectively removing tough stains and deep-seated dirt from carpets, sofas, and car seats. Utilizing powerful spray and suction technology, it injects cleaning solution deep into the upholstery fabric to break down stains, then instantly suctions the liquid and dirt into a separate tank, leaving surfaces clean and drying quickly. Featuring a modern black and white design with a comfortable handle for easy use and portability, the device comes with various cleaning heads to suit different fabric types and tight corners.
Technical specification:
Voltage: 11.1V
Power: 57-63W
Battery: 18650mAh Lithium 2000mAh
Clean Water Tank: 300ml
Wastewater Tank: 500ml
Maximum Suction Power: ≥8KPa
Maximum Odor Flow Rate: ≥5L/s
Noise Level: ≥78dB(A)
Charging Time: 3-3.5 hours
High Speed Operating Time: >20 minutes
Low Speed Operating Time: >40 minutes
Material: ABS
Two Adjustable Speeds
Rating: IPX4
Outdoor Air Filtration Method: Absorbent Cloth
Features 3 Buttons for On/Off, Speed Control, and Brush Recycle
Push Button Under Handle
Accessories: (1) Rotating Brush (2) Soft Rubber Brush (3) Type-C Cable
How to use:
Preparation: Fill the clean water tank with warm water and add an appropriate amount of non-foaming fabric cleaner.
Cleaning: Point the device head at the stain and press the spray trigger to wet the area. Then, use the included brush to gently scrub the stain if it is stubborn.
Vacuuming: Slowly pass the vacuum nozzle over the wet area; you will see the dirty water drawn into the transparent front tank.
Maintenance: After use, empty the dirty water tank and rinse it thoroughly with water to prevent the buildup of residue or unpleasant odors.
Tip: For best results, start cleaning stains as soon as they occur and before they dry completely into the fabric fibers.
Technical specification:
Voltage: 11.1V
Power: 57-63W
Battery: 18650mAh Lithium 2000mAh
Clean Water Tank: 300ml
Wastewater Tank: 500ml
Maximum Suction Power: ≥8KPa
Maximum Odor Flow Rate: ≥5L/s
Noise Level: ≥78dB(A)
Charging Time: 3-3.5 hours
High Speed Operating Time: >20 minutes
Low Speed Operating Time: >40 minutes
Material: ABS
Two Adjustable Speeds
Rating: IPX4
Outdoor Air Filtration Method: Absorbent Cloth
Features 3 Buttons for On/Off, Speed Control, and Brush Recycle
Push Button Under Handle
Accessories: (1) Rotating Brush (2) Soft Rubber Brush (3) Type-C Cable
How to use:
Preparation: Fill the clean water tank with warm water and add an appropriate amount of non-foaming fabric cleaner.
Cleaning: Point the device head at the stain and press the spray trigger to wet the area. Then, use the included brush to gently scrub the stain if it is stubborn.
Vacuuming: Slowly pass the vacuum nozzle over the wet area; you will see the dirty water drawn into the transparent front tank.
Maintenance: After use, empty the dirty water tank and rinse it thoroughly with water to prevent the buildup of residue or unpleasant odors.
Tip: For best results, start cleaning stains as soon as they occur and before they dry completely into the fabric fibers.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
.webp?unique=3cc1bad)
.webp?unique=6b8fd4e)
.webp?unique=6b8fd4e)
.webp?unique=3cc1bad)
.webp?unique=6b8fd4e)
.webp?unique=6b8fd4e)