ECOVACS DEEBOT X8 PRO OMNI Robot Vacuum and Mop

Place the OMNI Station Put the station on a flat floor near a power outlet. Leave enough space in front so the robot can enter and exit easily. Prepare the water tanks Fill the clean water tank with clean water and place it back correctly. Empty the dirty water tank when needed. Add cleaning solution if available The X8 PRO OMNI supports automatic cleaning-solution dispensing, so use ECOVACS-compatible solution only. The station can automatically regulate the solution ratio. Charge the robot first Place the robot in the OMNI station and let it charge fully before first use. Connect to the ECOVACS HOME App Download the ECOVACS HOME App, add the robot, connect it to Wi-Fi, and follow the setup steps. ECOVACS says the app can be used to add the device, connect it to Wi-Fi, choose modes/settings, and create schedules. Create the first map Start mapping from the app or voice control. Open room doors and remove small items like cables, socks, and toys. ECOVACS guidance says the robot should be in the OMNI station and fully charged before first cleaning/mapping. Choose the cleaning mode Select vacuuming, mopping, or vacuum + mop from the app. You can adjust suction level, water level, cleaning areas, schedules, carpet strategy, and cleaning order. Start cleaning Press Start from the app, use voice control, or press the button on the robot. The robot will clean automatically and return to the OMNI station when finished or when it needs charging. Use carpet settings The robot detects carpets and can lift the mop automatically by 10mm. For shaggy carpets or carpets with fibers longer than 10mm, ECOVACS recommends setting them as no-entry zones or folding them away during cleaning. After cleaning The station can automatically collect dust, wash the roller mop, dry it with hot air, and manage cleaning solution. You still need to refill clean water, empty dirty water, replace the dust bag, and clean brushes/sensors regularly.