Ecovacs Deebot T30 PRO Omni Vacuum Black - OPEN BOX

Place the OMNI Station Put the station on a flat floor near electricity, with enough free space in front so the robot can go in and out easily. Fill the clean water tank Remove the clean water tank, fill it with clean water, then place it back correctly. Install the mop pads Attach the mop pads under the robot if you want mopping. Charge the robot Place the robot on the OMNI station and let it charge fully before first use. Connect to the ECOVACS HOME App Download the app, add the T30 PRO OMNI, connect it to Wi-Fi, and follow the setup steps. Create the first map Start mapping/first cleaning from the app. Open room doors and remove cables, socks, toys, and small objects from the floor. Choose cleaning mode Select Vacuum, Mop, Vacuum & Mop, or Mop after Vacuum from the app. ECOVACS lists these as the cleaning modes for this model. Adjust suction and water level Choose the suction level and water flow depending on the floor type and dirt level. Start cleaning Press Start from the app, the robot button, voice assistant, or foot-touch control if enabled. ECOVACS says the T30 PRO OMNI supports YIKO voice assistant and foot-touch cleaning start. After cleaning The station can wash the mop pads, collect dust, and handle maintenance depending on settings. Empty the dirty water tank, refill clean water, and replace the dust bag when needed.