AIPER Cordless Robotic Pool Cleaner vacuum

Charge the cleaner first Connect it to the charger and fully charge it before first use. Charging takes around 2.5 hours. Clean the pool first if very dirty If the pool has large leaves, stones, or heavy dirt, remove them manually first. This cleaner is best for regular floor maintenance. Check the filter tray Make sure the filter tray is clean and installed correctly before placing it in the pool. Turn it on Press the power/start button. The Seagull SE is designed for one-click activation. Place it in the pool Put the cleaner into the water slowly and let trapped air escape so it sinks properly to the pool floor. Let it clean automatically The cleaner moves around the flat pool floor and collects dirt/debris. It does not climb walls or clean the waterline. Auto-parking When cleaning finishes or the battery becomes low, it automatically parks near the pool wall for easier pickup. Remove it from the pool Use the handle or retrieval hook to lift it out. Let the water drain before carrying it. Clean the filter after use Open the cleaner, remove the filter tray, empty debris, rinse it with clean water, then let it dry. Dry the charging port before charging Make sure the charging area is completely dry before connecting the charger.