Ecovacs Winbot W2 Omni WG821-11

1. Initial Setup and Charging Charging the Omni Station: This version features a portable Omni Station with a built-in high-capacity battery. Plug the station into a power outlet to fully charge it before first use (this feature allows the device to operate completely wirelessly without needing a nearby power outlet while cleaning). Preparing the Cleaning Pad (Mop): Attach the included cleaning pad to the bottom of the robot. It is recommended to slightly dampen and wring it out well before attaching it for optimal results from the start. Filling the Water Tank: Open the water tank plug on the robot, fill it with Ecovacs cleaning solution or purified water, and then close the plug securely. 2. Setting Up and Attaching to the Window Posting the Base Station: Place the Omni Station on the floor near the window. This station is designed with sufficient weight to act as a safety "anchor" to prevent the robot from falling in case of an emergency. Powering On: First, turn on the base station, then pull the safety and power cable (connecting the station to the robot) to the appropriate length for the window. Adheres to the glass: Place the Winbot on the glass window surface and press the power button on it (or via the terminal). You will immediately hear the motor, and the robot will use suction to firmly and securely adhere to the glass. Ensure it is firmly in place before releasing. 3. Cleaning Instructions (via device or app) Start cleaning: You can start the cleaning process with the touch of a button on the terminal, from the robot itself, or professionally via the Ecovacs Home app on your smartphone. Smart spray system: As it moves, the robot automatically sprays water (thanks to its 3-way spray system) to dissolve dirt, which is then wiped away with the pad. Edge coverage: Smart sensors ensure the robot reaches all window edges and corners, avoiding the frames for a thorough and systematic cleaning. 4. Finish and storage Automatic return: When the cleaning cycle is complete, the robot will automatically return to its starting position for easy retrieval. Removing the robot: Firmly grip the robot handle, press and hold the power button to stop the suction, then gently pull it off the glass. Cleaning and smart storage: Remove the cleaning pad to wash and dry it. Empty the robot's water tank. Finally, press the "Cable Collection" button on the base station to automatically retract the cable. Place the robot and attachments inside the Omni base bag for neat and convenient storage.