Handheld Steam Cleaner DF-958

This steam cleaner and sanitizer removes dirt and grime without chemicals. Simply press it to eliminate the buildup and dirt.
It generates powerful steam that reaches into corners and crevices for easy cleaning of your kitchen and bathroom.
Suitable for sanitizing items like glass, pots, and ovens with quick results.
Its user-friendly design allows for less cleaning. 
 
Technical specification:

Specification: Model: DF-958
Material: PP+ABS
Colour: White
Rated Voltage: 110V(US plug)/220V(UK plug)/220V(EU plug)/220V(AU plug)
Frequency: 50/60Hz
Operating Pressure: 300Kpa
Heating Time: About 2min
Steam Output: 26G/min
Power: 1000W
Operating Temperature: -20℃-100℃
Steam Pressure: 3Bar
Water Tank Capacity: 350ML (recommended 250ml)
Power Cord Length: 2.8m/110.2in

How to use:

1. Preparation and Filling (Before Plugging In)
Removing the Cap: Ensure the appliance is unplugged and completely cool. Unscrew the safety cap located on top of the appliance (the large round handle) by turning it counterclockwise.

Filling: Use the measuring cup and funnel (usually included with the appliance) to pour water into the reservoir.

Important Warning: Do not fill the reservoir completely to the brim; leave a small space for steam to form and prevent boiling water from escaping instead of steam. (The typical capacity is approximately 250-350 ml).

Closing: Replace the safety cap and ensure it is tightly closed to prevent pressure leakage.

2. Attaching Accessories and Operation
Selecting the Head: Attach the appropriate attachment for the task to the appliance nozzle:

Long Nozzle: For reaching tight corners and crevices.

Round Brush: For scrubbing tough grease and grime.

Scraper/Mop: For glass and mirrors.

Plug and Heat: Plug the appliance into the electrical outlet. The power indicator (usually red) will light up to indicate that heating has begun.

Wait: Wait approximately 2 to 3 minutes until the light turns off (or changes color), indicating that the water has boiled and the pressure is ready for use.

3. Steam Cleaning Instructions
Steam Release: Point the nozzle at the surface to be cleaned and press the button or trigger (located on the handle or under your thumb) while simultaneously pressing the lock button on the side. Both buttons must be pressed at the same time to release the steam.

Cleaning: Slowly move the steam over the stains to dissolve them with heat, then immediately wipe the area with a clean cloth to remove the dissolved dirt.

Sanitizing: To sanitize surfaces (such as doorknobs or children's toys), direct the steam at the area for 5-10 seconds to kill bacteria.

4. Refilling and Safety (Very Critical Step)
This device operates on a pressure system, so never open the lid while hot pressure is inside.

If the water runs out and you want to refill:

Unplug the device.

Press and hold the steam button to release any remaining pressure completely until steam stops flowing.

Wait a few minutes for the device to cool down slightly.

Open the lid slowly and very carefully (use a cloth to protect your hand from any remaining steam), then refill.

5. When finished, unplug the device, release any remaining steam, and allow it to cool completely.

Empty any remaining water from the reservoir (do not store it with water in it to avoid limescale buildup).