kenwood MEAT CHOPPER MGP40.000WH 1500 WATT

Assembly Step-by-StepInsert the feed screw into the grinder head housing.Mount the cutting blade onto the screw end.Face the flat cutting edge strictly outwards.Choose a mincing disc based on desired texture.Align the disc notches with the housing tabs.Screw the ring collar clockwise until firmly secured.Lock the grinder head onto the motor unit.Place the aluminum tray onto the feed tube.🥩 Processing the MeatRemove all bones, gristle, and tough tendons.Cut the meat into small, clean strips.Chill the meat slightly for much cleaner cutting.Place a bowl under the grinder nozzle.Turn the switch to the ON position.Feed the meat slowly into the tray hopper.Push meat down using ONLY the plastic pusher.Never use your fingers or other kitchen utensils.🔄 Using the Reverse FunctionStop the machine if it jams or slows.Switch the control to the REV position.Run in reverse for a few seconds.Clear the blockage safely from the feed tube.Switch back to ON to resume normal grinding.🧼 Cleaning and MaintenanceUnplug the appliance immediately after every use.Disassemble all components from the motor base.Wash metal parts by hand in warm water.Dry metal pieces thoroughly to avoid any rust.Coat mincing discs with a little vegetable oil.Wipe the motor housing with a damp cloth.Store the power cord inside the bottom base